With the development of the industrial economy, various manufacturing companies have sprung up, but many problems that follow have also attracted people's attention, and environmental problems are one of them. Discharging a large amount of…
The packing layer in the wet scrubber serves as a mass transfer device for the contact components between the gas and liquid phases. The bottom of the packing tower is equipped with packing support plates,…
Industry Introduction Spraying refers to covering the surface of the metal and non-metal with a protective layer or a decorative layer and is the basic technical means used for product surface protection and decoration. The…
Polypropylene board introduction Polypropylene board is a kind of semi-crystalline material. It is harder and has a higher melting point than PE. It is used in acid and alkali-resistant equipment, environmental protection equipment, wastewater and…
Chemical waste gas comes from toxic and harmful gases discharged from chemical plants in chemical production. The composition of chemical waste gas produced by different chemical production industries is very different, there are many types of pollutants,…
Treatment of toxic gas: Absorbents and adsorbents used in the treatment of toxic gases should be effective before they can be used. When handling toxic gases, the staff must wear gas masks, gloves, and other…
The working principle of the wet scrubber is to neutralize the acid-base exhaust gas by means of water hydration, so it is necessary to select different chemical agents according to the acidity and alkalinity of…
PP air duct, also known as polypropylene tube, has the advantages of energy-saving and material saving, environmental protection, lightweight and high strength, corrosion resistance, a smooth inner wall without scaling, simple construction and maintenance, and long…
With the continuous development of the fan industry, there are more and more types of fans. The blower is one of the most common types. It has the advantages of saving power, reducing energy consumption,…
Preventing urban air pollution is a comprehensive challenge that requires the joint efforts of governments, social organizations and individuals. Ways and strategies to reduce air pollution in cities: Promote the use of clean energy: Promote…
The volute and impeller of the PP centrifugal fan are made of PP plastic, which has the characteristics of high strength, lightweight, corrosion resistance, stable operation, and low noise. It can be used to transport corrosive…
PP wet scrubber is used in food, chemical, plastic, electronics, automobile spraying, mold, wood industry, metallurgy, power plant, solar energy, alloy polishing, and other industries to purify waste gas generated in the production process. It…
Air pollution control equipment refers to a series of control equipment used to deal with air pollution and improve the environment, including dust removal equipment, gaseous pollutant control equipment, air collection hoods, and piping systems.…
Product description Wet scrubbers are divided into vertical scrubbers and horizontal wet scrubbers according to different shapes, subject to local restrictions. Or generally use horizontal wet scrubbers when installing indoors. The horizontal wet scrubber adopts…
The so-called waste gas treatment is to have soot waste gas treatment, dust waste gas treatment, organic waste gas treatment, waste gas malodor treatment, acid-base waste gas treatment. What is exhaust gas treatment: exhaust gas…
1: The liquid level of the water tank is not flat, the filter plate water pump is low on this site and high on the other side. Because the filter plate in the water tank…
Exhaust gas scrubbers, also known as wet scrubbers, water scrubbers, and purification towers, are commonly used equipment in gas-liquid reaction systems. The exhaust gas is in reverse contact with the liquid. After scrubbing, the gas…
The thickness of the polypropylene PP air duct is more appropriate. According to the production experience of the polypropylene PP air duct manufacturer, the PP air duct has two types: round and square. The PP…
For the acid mist exhaust gas treatment project in the waste and damaged battery storage room, Xicheng Ep provides the design of the acid mist exhaust gas purification system, the selection of the fan, the…
Laboratory PP acid tank, because laboratory PP acid tank is made of PP anti-corrosion plastic material, so laboratory PP acid tank is also called PP acid tank, pvc acid tank, plastic anti-corrosion acid tank. The…
Introduction of polypropylene PP water tank materialPP water tanks are more and more widely used. In the industry, many barrels and acid metering tanks, which used to be carbon steel or stainless steel, are gradually…
1. Brief description of ammonia waste gas Ammonia waste gas is produced in pharmaceutical, fertilizer, chemical, silica gel and other industrial production. Ammonia is a colorless gas with a pungent odor, corrosiveness and toxicity. Long-term…
To choose a suitable wet scrubber type, it is necessary to go through investigation and research, fully understand the operating conditions, and choose a reasonable tower type with better characteristics. -Generally speaking, there are many…
A new type of environmental protection equipment-acid mist scrubber played an important role in waste gas treatment. Many people know that the acid mist scrubbers we often talk about are divided into two types, vertical…
Brief introduction of activated carbon adsorption box Activated carbon adsorption box is an economical and practical organic waste gas purification and treatment device that meets the standard rate; it is an environmental protection equipment product for…
How to reduce factory waste gas treatment? First of all, it depends on the specific composition of the exhaust gas. If there is dust, an electrostatic precipitator should be used first to recover the useful…
The wet scrubber system is a new type of gas purification and treatment equipment. The English name Scrubber, as the name suggests, is used to treat harmful components in the exhaust gas and clean exhaust…
The exhaust gas generated in the laboratory is very harmful, so how to deal with the exhaust gas in the laboratory and what equipment needs to be installed, Xicheng Ep Ltd technicians will give professional…
PP water tank drawing design Drawing is required. According to user needs, use CAD drawing software to draw the outline size, length, width, and height of the PP water tank. It should be noted that the bottom…
From the perspective of industrial air pollution, how do ordinary people judge whether there is pollution? I believe that most people can learn the basic four-step observation "smell, see, touch, search", regardless of the order…
Customized PP round ducts can be customized φ500MM~φ2000MM according to requirements. Hot-melt welding is seamless, and the tube surface is flat and smooth. The PP air pipe is reinforced with flanges, and the pipe body…
PP Air duct is a piping system used for air transportation and distribution. PP air duct is a vent pipe made of PP material. Compared with other material ducts, it has wear resistance, no scaling,…
The quality of rigid PVC extruded board is in accordance with GB/T13520-1992. It has excellent chemical stability, corrosion resistance, high hardness, high strength, UV resistance (aging resistance), fire resistance and flame retardant (self-extinguishing), reliable insulation…
The 90°PP pipe elbow adopts a one-piece molding process and a direct plug-in connection, which is convenient for installation and welding. PP plastic material has high anti-chemical corrosion, flame retardant, high hardness, and other characteristics.…
The laboratory fume hood of Xicheng Environmental Protection has its own patent, which is made of high-quality plastic PP (polypropylene), the thickness of the sheet is 8mm, and it is integrally formed. It has acid and alkali…
The Square PP duct adopts manual seamless welding technology, which has high cleanliness and good sealing performance. It can be used in air-conditioning ventilation systems and industrial exhaust gas emission systems. The square pipe can…
An activated carbon adsorption tower is widely used in industrial waste gas treatment, suitable for treating waste gas and malodorous gas in chemical, pharmaceutical, hardware, and other industries. The types of organic waste gas that can…
Sources of VOCs in the electronics industry The production process of electronic products involves painting, baking, and other functions. The paint and other coatings used in these processes require many organic substances such as toluene,…
Spray tower, referred to as wet scrubber. A spray tower is a kind of equipment for waste gas treatment, and such purification equipment can be used in industrial waste gas treatment. Usually, more acid mist exhaust…
Hot-melt connection method (when the pressure exceeds 0.8MPaΦkg, the welding method is used, and the pressure of the pipe group can be increased by more than 1.5 times). (1) The pipe (pipe fitting) to be…
Function and composition of industrial waste gas treatment scrubber Industrial waste gas treatment scrubbers have high purification efficiency, good corrosion resistance, lightweight, high specific strength, small footprint, and large waste gas treatment capacity. It is suitable…
The air valve is an indispensable central air-conditioning terminal accessory in the ventilation, air schedules, and air purification engineering of industrial plants and civil buildings. It is generally used in air conditioning and ventilation system…
Ammonia scrubber has been used in exhaust gas purification as a spray absorption device. It develops the concept of fluidized bed into vapor-liquid mass transfer equipment, so that the filler in the spray tower is…
Environmentally friendly plastics are a big concept. For example, the production of raw materials is environmentally friendly. It can be called environmentally-friendly plastics. Recycling waste plastics to reduce the generation of plastic waste. It is…
Exhaust gas hazards of organic waste gas treatment equipment: The hazards of organic waste gas to the human body are manifold, and the toxicity of organic waste gas varies from industry to industry. Among them,…
The material and strength of polypropylene PP board. PP board has the characteristics of lightweight, uniform thickness, area size, good heat resistance, high strength, excellent chemical stability and electrical insulation, and non-toxicity. Polypropylene PP is…
We may not know much about VOC exhaust gas, but for friends in the industrial field, he should be very familiar with it. Now everyone is advocating vigorously controlling exhaust gas because it has many…
The laboratory fume hood scrubber is made of PP polypropylene material, and the inner packing is a PP Pall ring or a hollow sphere. According to the gas-liquid two-phase mass transfer reaction on the surface…
Among the types of industrial waste gas, corrosive gases account for a certain proportion. The management of corrosive gases (such as acid and alkaline waste gas) is mostly managed by liquid absorption. This method has…
Welcome to WordPress. This is your first post. Edit or delete it, then start writing!
